Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Trusted HVAC Cleaning for West Hills Homeowners
Your HVAC system moves air through the same coil, blower, and cabinet surfaces for years, and that buildup is what makes a house feel stuffy, dusty, and hard to cool evenly. HVAC cleaning in West Hills means opening the system, cleaning the components air actually touches, and confirming the whole thing can breathe again. Our technicians have up to 15 years of experience, and they arrive with Rotobrush rotary equipment, Nikro extraction, and Abatement Technologies HEPA filtration rather than shop vacuums. The local pro is licensed and insured as their state requires, and we work to one flat price per system, agreed before anything comes apart. Call (855) 658-4109 and ask for same-day service.
What Our HVAC Cleaning Service Includes
HVAC cleaning covers the components inside your air handler and condenser, not just the ducts feeding them. Each part collects a different kind of soil, so each one gets a different method. Here’s what we clean and when it matters.
Evaporator Coil Cleaning
The evaporator coil is the finned assembly that removes heat and humidity from the air, and it sits wet for much of the year. In our mild valley climate the system runs long cooling cycles, so dust and lint stick to damp fins and stay there. We clean the coil in place where access allows, and we treat the fins with a coil-safe cleaner rather than a harsh wash that dulls the aluminum.

Blower Cleaning
The blower wheel pulls return air and pushes it through the system, and its curved blades are a dust trap. A loaded wheel moves less air, runs louder, and forces the motor to work harder than it should. We pull the blower assembly, clean each blade by hand, and check the wheel for balance before it goes back.

Condenser Cleaning
The outdoor condenser sheds heat through hundreds of thin fins, and those fins clog with dust, leaves, and yard debris. A blocked condenser raises head pressure and shortens compressor life. We clean the coil from the inside out, straighten bent fins where we can, and clear the cabinet so air moves through freely.

Air Handler Cleaning
The air handler cabinet holds the blower, coil, and often the filter rack, and its interior collects a fine film that never gets wiped down. We clean the cabinet walls, the drain pan, and the drain line so standing water doesn’t become a growth site. This is also where we check that the filter fits its slot and isn’t pulling air around the edges.
Heat Exchanger Cleaning
On a furnace, the heat exchanger carries combustion gases while room air passes over its outside surface. Soot and dust on that surface reduce efficiency and can mask cracks. We clean what’s accessible and inspect the exchanger visually; any sign of a crack or hole gets flagged for a licensed heating technician before the system runs again.
Coil Treatment
Cleaning removes the soil, but bare fins start collecting again the moment the system runs. After cleaning we apply a Guardsman-backed protective treatment that resists microbial regrowth on the coil surface. It’s the difference between a system that’s clean today and one that stays that way through a long cooling season.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Brands We Service for HVAC Cleaning
We service Honeywell and Aprilaire air quality equipment, and we know where each line tends to wear. Honeywell media cabinets and electronic air cleaners are built around a filter track that gets sloppy with age, so we check the seal and the cabinet itself, not just the filter. Aprilaire humidifiers and filtration units have their own pad, water panel, and drain details, and cleaning the HVAC system without addressing those leaves half the job undone. Coil treatment work is where Guardsman protection products come in, extending sanitation results past the visit.
On the cleaning side, our equipment is Rotobrush rotary brush systems, Nikro industrial vacuums, and Abatement Technologies HEPA filtration, all of which hold up under the negative pressure a real HVAC cleaning job requires. It’s the same combination restoration professionals rely on when they need to contain what they’re removing. Whether you have Honeywell, Aprilaire, or any other make, we can help.
Signs You Need HVAC Cleaning Right Now
- Dust returns within days of cleaning. If surfaces resettle quickly after you wipe them, the source is usually the blower or coil, not your housekeeping. Cleaning the system removes the reservoir instead of chasing the symptom.
- Cooling is uneven room to room. Restricted airflow from a loaded coil or blower shows up first as rooms that never quite catch up. Before you assume the system is undersized, have the air path checked.
- A musty smell when the fan starts. That smell is often the drain pan or a damp coil surface. It’s worth addressing before the system runs another season with it.
- Visible buildup on the coil or blower. If you can see a mat of dust on the fins or the blower blades, the component has been overdue for a while. Cleaning restores airflow and takes load off the motor.
- Recent renovation or a long vacancy. Drywall dust and construction debris travel straight into the return, and a house that sat empty collects its own film. Both are good reasons to have the system opened and cleaned.
Our HVAC Cleaning Process – Step by Step
- 1
Inspection and airflow check. We start by looking at the system as a whole: filter condition, return sizing, visible buildup, and where the cabinet can be opened. We also check static pressure where the setup allows, because high pressure tells us the air path is restricted somewhere.
- 2
Containment and negative pressure. Before any agitation, we set up Abatement Technologies HEPA filtration and bring the system under negative pressure. That keeps what we loosen inside the equipment rather than in your living room.
- 3
Mechanical cleaning of components. Rotobrush rotary tools agitate the coil, blower, and cabinet surfaces, and Nikro extraction pulls the loosened material out. We clean each component to bare metal where it’s reachable, then inspect again under light.
- 4
Drain and cabinet detail. We clear the drain line, clean the pan, and wipe the cabinet interior so nothing wet or organic stays behind. This step is quiet but it’s the one that keeps smells from coming back.
- 5
Treatment, reassembly, and a before-and-after record. We apply coil treatment, close the system, confirm airflow, and show you photos of your own components before and after. You see what was removed, not just what we say was removed.
See the difference
Before
After
Before
After
Before
AfterHow Much Does HVAC Cleaning Cost in West Hills?
HVAC cleaning in West Hills typically runs $350 to $750 for a complete system, and where you land depends on how many components need work and how much access the installation allows. A typical evaporator coil and blower cleaning runs $250 to $450. Air handler and cabinet cleaning with drain service usually adds $100 to $200 on top. Condenser cleaning is often $150 to $300 as a separate job, and heat exchanger cleaning on a furnace runs $200 to $400 depending on how the unit is built.
Access is the biggest price factor. A system in a closet or a horizontal unit in an attic takes more time to reach than an upright in a garage. Heavy buildup, pet hair, or renovation dust adds labor. What you shouldn’t pay for is a per-component menu that grows once the technician is inside. We quote one flat price per system before work starts, and the written estimate sets the final number. The estimate itself is free, and it includes a look at the coil and blower so the price reflects the actual condition rather than a phone guess.
| Service | Typical Range | What Drives the Price |
|---|---|---|
| Evaporator coil and blower cleaning | $250 – $450 | Access, buildup level |
| Air handler and drain service | $100 – $200 additional | Cabinet condition, drain access |
| Condenser cleaning | $150 – $300 | Debris load, fin condition |
| Heat exchanger cleaning | $200 – $400 | Furnace design, accessibility |
| Complete system cleaning | $350 – $750 | Number of components, layout |
HVAC Cleaning Near West Hills – Our Service Area
We connect homeowners across the west San Fernando Valley with independent local professionals, including West Hills, Hidden Hills, Bell Canyon, Canoga Park, Woodland Hills, Winnetka, Chatsworth, Porter Ranch, and Reseda. Drive times across the valley vary with traffic, which is why we schedule around actual dispatch windows rather than promising a fixed arrival. Fast dispatch runs 7am to 7pm, Sunday through Friday, and Saturday is closed. If you’re also booking duct work, start with air duct cleaning in West Hills and we’ll coordinate both on one visit. Neighbors in Calabasas and Agoura Hills are covered too.
Serving West Hills, CA – Our Local Coverage Area
We serve West Hills and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – HVAC Cleaning in West Hills
HVAC cleaning is the cleaning of the components inside your heating and cooling equipment: the evaporator coil, blower wheel, air handler cabinet, drain pan, condenser, and heat exchanger where accessible. It’s different from duct cleaning, which handles the distribution lines. The two work best together, since cleaning ducts while leaving a loaded coil in place just means the system soils its own air path again.
A complete HVAC cleaning usually takes two to four hours, depending on the number of components and how accessible the equipment is. A coil and blower job on an upright unit in a garage moves faster than a horizontal air handler in a tight attic. We’d rather take the extra hour than rush a component that needs real agitation to come clean.
Most complete system cleanings in West Hills land between $350 and $750, with individual components running less. The written estimate sets the final price, and we agree on it before work begins. Call (855) 658-4109 for an exact quote; estimates are free.
Yes. We work with Honeywell and Aprilaire whole-home air quality systems, including filtration cabinets and humidifier components, and we clean around them rather than treating them as an obstacle. If your equipment is a different make, we can still clean it; the cleaning method follows the component, not the badge on the door.
Same-day service is often possible when you call early, and it depends on the day’s schedule. We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday, with Saturday closed. A call outside dispatch hours gets booked into the next opening. Call (855) 658-4109 to check availability.
We stand behind the cleaning with a satisfaction guarantee, and we use Guardsman-backed protection products after sanitizing to help results last. If something doesn’t look right when we’re done, tell us before we leave. Before-and-after photos of your own components are part of every job, so there’s a clear record of what was cleaned.
Clear access to the air handler and the outdoor condenser, and if possible clear a path to the attic or closet where the equipment sits. Note any rooms that never cool properly, since that helps us focus the inspection. You don’t need to remove the filter beforehand; we’ll look at it as part of the job.
Schedule Your HVAC Cleaning Service in West Hills Today
One flat price per system, agreed before we start, with before-and-after photos of your own equipment and a satisfaction guarantee behind the work. That’s the whole offer. Call (855) 658-4109 for a free, no-obligation estimate on HVAC cleaning in West Hills. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Air Duct Cleaning West Hills.